0
Phase: Three phase
Frequency: 50/60 Hz
Voltage: 400 V
Type of welding: MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift
No-load voltage: 63 V
Regulation current: 20 - 300 A
Current max: 270 A
Diameter electrodes: 1.6 - 6 mm
Steel welding wire diameter: 0.6 - 1.2 mm
Inox welding wire diameter: 0.8 - 1.2 mm
Aluminium welding wire diameter: 0.8 - 1.2 mm
Flux cored welding wire diameter: 0.8 - 1.2 mm
Brazing wire diameter: 0.8 - 1.2 mm
Length: 865 mm
Width: 390 mm
Height: 915 mm
Weight: 37 Kg
MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine controlled by a microprocessor, with 4-roller wire feeder.
Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanised sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities.
Synergic adjustment makes the product simple to use.
The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc.
Features:
- Manual or synergic operating;
- 30 pre-set synergic curves;
- MIG-MAG adjustments: wire up slope, electronic reactance, wire burn-back time, post gas;
- 2/4 time operation selection, spot, inch and mm material thicknesses;
- Protections: thermostatic, overvoltage, undervoltage, overcurrent, engine driven generator (+/-15%);
- TIG Lift
Complete with MIG-MAG torch, cable and earth clamp.
Not binding images and technical data.
Phase: Three phase
Frequency: 50/60 Hz
Voltage: 400 V
Type of welding: MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift
No-load voltage: 63 V
Regulation current: 20 - 300 A
Current max: 270 A
Diameter electrodes: 1.6 - 6 mm
Steel welding wire diameter: 0.6 - 1.2 mm
Inox welding wire diameter: 0.8 - 1.2 mm
Aluminium welding wire diameter: 0.8 - 1.2 mm
Flux cored welding wire diameter: 0.8 - 1.2 mm
Brazing wire diameter: 0.8 - 1.2 mm
Length: 865 mm
Width: 390 mm
Height: 915 mm
Weight: 37 Kg
SHARE 
