0
Power supply: 230V 50/60Hz
Adjustment Range: 10-150A
Working cycle at 40°C: 150A 20% 90A 60% 70A 100%
Duty cycle at 20%C: 150A 30% 105A 60% 80A 100%
Copper plated steel: Ø 0,8mm
Flux-cored wire (NO GAS): Ø 0,9mm
Insulation class: H
Degree of protection: IP22S
Length: 370 mm
Width: 170 mm
Height: 260 mm
Weight: 8 Kg
HELVI filMAKER182 is a portable welder with inverter technology for welding wire, offering the possibility of welding both with and without GAS (with flux-cored wire).
With HELVI filMAKER182 you can easily set the welding parameters thanks to the intuitive graphics of the control panel. The synergic mode, which automatically sets the wire speed and voltage once the thickness to be soldering has been selected on the front panel, helps reduce welding adjustment errors.
The HELVI filMAKER182 welder is supplied in a case complete with a soldering flashlight 2.0 meters long, a 0.9 mm diameter flux-cored wire reel weighing 0.5 kg, and a cylinder support kit.
The HELVI filMAKER182 portable welder is suitable for use with any motor generator.
The HELVI filMAKER182 portable welder is suitable for use with any motor generator.
HELVI filMAKER182 TECHNICAL CHARACTERISTICS
Power supply: 230V 50/60Hz
Adjustment range: 10-150A
Working cycle at 40°C: 150A 20% 90A 60% 70A 100%
Working cycle at 20%C: 150A 30% 105A 60% 80A 100%
Corroded steel: Ø 0.8mm
Cored Wire (NO GAS): Ø 0.9mm
Insulation Class: H
Protection Degree: IP22S
Length: 370 mm
Width: 170 mm
Height: 260 mm
Weight: 8 Kg
Looking for a portable welding machine with different features? Here you can find the whole range of HELVI or other specialized brands
Images and technical data are not binding and may be subject to revision by the supplier
Power supply: 230V 50/60Hz
Adjustment Range: 10-150A
Working cycle at 40°C: 150A 20% 90A 60% 70A 100%
Duty cycle at 20%C: 150A 30% 105A 60% 80A 100%
Copper plated steel: Ø 0,8mm
Flux-cored wire (NO GAS): Ø 0,9mm
Insulation class: H
Degree of protection: IP22S
Length: 370 mm
Width: 170 mm
Height: 260 mm
Weight: 8 Kg
SHARE 