- New
CICLONE C305 DUSTFIGHTER 45 NOZZLES
Maximum range 40 mt.
Water consumption 35lt./min. with 10bar BP pump ----15lt./min. with 70bar High Pressure pump. (option 2)
Nozzle crown 45 self-cleaning stainless steel nozzles mounted on 1 1⁄2 " INOX ring tube, single delivery feed controlled by solenoid valve.
Drop size 20>180 μm (drop size may vary depending on job)
Turbine rotation 340° automatic on electromechanical slewing ring with servomotor, electronically programmable by PLC
Turbine inclination -10° >+50° Manual with worm screw (electric actuator available as an option)
Turbine fan Die-cast aluminium fan, 11 variable geometry blades, Ø 660mm,
5.5Kw /1500 rpm motor. 380v 50Hz direct starting.
Total installed power 7.7 KW - (suggested generator set 22Kva )
Power supply 400V 50Hz
Degree of Protection International standard IP55
Air flow 9000 m3/h
Noise level 93lwa = 70db at 4 mt.
- Frequency (Hz)
- 50
- Voltage (V)
- 400
- Protection degree
- IP55
- Throwing distance (m)
- 40
- Maximum output capacity (Lt/min)
- 35
- Pressure (bars)
- 10
- Air flow (m³/h)
- 9000
- Acoustic pressure
- 70 dB(A) at 7 m
- Length (mm)
- 1500
- Width (mm)
- 1350
- Height (mm)
- 1970
- Dry weight (Kg)
- 420
CICLONE C305 DUSTFIGHTER 45 NOZZLES
The dustifighteer CICLONE CM305 is a 4-nozzle dustfighter with a range of 40 metres and a water flow rate of 35 litres per minute.
The versatility of the CM305 is significantly reflected in the available configurations. The dustifighter CICLONE CM305, in fact, be configured on a fixed base with an electro-welded, hot-dip galvanised steel platform.
Technical characteristics of the dustfighter CICLONE C305:
Maximum range 40 mt.
Water consumption 35lt./min. with 10bar BP pump ----15lt./min. with 70bar High Pressure pump. (option 2)
Nozzle crown 45 self-cleaning stainless steel nozzles mounted on 1 1⁄2 " INOX ring tube, single delivery feed controlled by solenoid valve.
Drop size 20>180 μm (drop size may vary depending on job)
Turbine rotation 340° automatic on electromechanical slewing ring with servomotor, electronically programmable by PLC
Turbine inclination -10° >+50° Manual with worm screw (electric actuator available as an option)
Turbine fan Die-cast aluminium fan, 11 variable geometry blades, Ø 660mm,
5.5Kw /1500 rpm motor. 380v 50Hz direct starting.
Total installed power 7.7 KW - (suggested generator set 22Kva )
Power supply 400V 50Hz
Degree of Protection International standard IP55
Air flow 9000 m3/h
Noise level 93lwa = 70db at 4 mt.
Looking for a dustfighter with different technical characteristics? HERE you can find the area dedicated to PRAMAC gensets or other specialised brands.
- Frequency (Hz)
- 50
- Voltage (V)
- 400
- Protection degree
- IP55
- Throwing distance (m)
- 40
- Maximum output capacity (Lt/min)
- 35
- Pressure (bars)
- 10
- Air flow (m³/h)
- 9000
- Acoustic pressure
- 70 dB(A) at 7 m
- Length (mm)
- 1500
- Width (mm)
- 1350
- Height (mm)
- 1970
- Dry weight (Kg)
- 420