VICTRON Quattro 24-8000-200 100/100 Inverter-Charger

Brand: VICTRON Energy

Reference: QUA248020010

Condition: New product

Sine wave inverter/charger
Maximum feed through current: 2x100A
Voltage: 24V
AC power output counter at 25 °C (VA): 8000
Cont. power at 25°C / 40°C: 8000VA / 6500W
Maximum power (W): 16000
Output AC voltage/frequency: Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Input voltage range (DC V): 19-33 V
Material and Color: Steel(Blue Ral 5012)
AC input: Input voltage range: 187-265 VAC Input frequency: 45-65Hz
Absorption" charging voltage: 28,8 V
Holding" charging voltage: 27,6 V
Service battery charging current: 200A
Protection category: IP 21
Weight: 45 Kg.
Length: 280 mm
Width: 350 mm
Height: 470 mm

Technical features

Phase: Single phase
Frequency (Hz): 50
Voltage (V): 230
Protection degree: IP21
Output voltage (V): 230
Nominal current (A): 28.8
Charging voltage (V): 24
Length (mm): 280
Width (mm): 350
Height (mm): 470
Overload protectors: Yes
Input voltage (V): 24
Kind of wave: Pure Sinusoidal
Continuous power (W): 8000
Colour: Blue
Weight (Kg): 45

Details

Quattro

Multifunctional

Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Models:3000VA, 5000VA, 8000VA, 10000VA, 15000VA

VICTRON Quattro 24-8000-200 100/100 Inverter/Charger

Two AC Inputs & two AC Outputs

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature

The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.

Remote Monitoring and Control

Monitor and control your Quattro and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more.

Technical Sheet / Manuals