- New
GMP CONDOR 200 M SUBMERSIBLE ELECTRIC PUMP FOR DRAINAGE WITH FLOAT
Phase type: Single-phase
Voltage: 230V
Frequency: 50 Hz
Version with float switch
Water flow rate at 2m: 650 l/min
Head depth: 18 m
Maximum debris section: 45 mm
Pump revolutions: 2900 RPM
Max depth: 5 m.
Max liquid temperature: +40 °C
Pump body: Cast iron
Impeller: Cast iron
Motor casing: Stainless steel
Motor shaft: Stainless steel
Mechanical seal: n.1 Silicon carbide
Protection class: IP 68
Length: 200 mm
Width: 325 mm
Height: 475 mm
Net weight: 26 Kg
- Phase
- Single phase
- Frequency (Hz)
- 50
- Voltage (V)
- 230
- Engine rpm (rpm)
- 2900
- Protection degree
- IP68
- Pump type
- Submersible Pump
- Fluid type
- Clean water
- Height of suction (m)
- 18
- Maximum output capacity (Lt/min)
- 650
- Input power (W)
- 1500
- Main body material
- Cast Iron - Stainless Steel
- Float
- Yes
- Maximum use depth (m)
- 5
- Maximum height (m)
- 18
- Outlet diameter thread type (mm/inches)
- 100 mm - 4"
- Length (mm)
- 200
- Width (mm)
- 325
- Height (mm)
- 475
- Dry weight (Kg)
- 26
GMP CONDOR 200 M SUBMERSIBLE ELECTRIC PUMP FOR DRAINAGE WITH FLOAT
GMP CONDOR 200 M is a multifunction submersible electric pump ideal for clean and turbid water up to the maximum debris section of 45 mm.
GMP CONDOR 200 M is equipped with an integrated float switch with automatic on/off system, the motor is equipped with thermal protection and is equipped with a handle for easy transport and immersion.
GMP CONDOR 200 M is a multifunctional tool, therefore, capable of operating in multiple conditions of use and successfully solving different problems. Made of cast iron and stainless steel, it can be immersed up to 5 meters deep and raise water up to a height of 18 metres. The motor, equipped with protection against high temperatures and with a power of 1.5W, also allows the maximum flow rate of 650 l/min to be reached.
Given its multifunctionality, the GMP CONDOR 200 electric pump M lends itself to various applications, from the suction of water in flooded rooms to the emptying of swimming pools, wells, ponds, pits and cisterns. Equipped with an automatic float switch, this tool can remove water up to a residual level of 45 mm.
TECHNICAL CHARACTERISTICS GMP CONDOR 200 M
Phase type: Single-phase
Voltage: 230V
Frequency: 50 Hz
Version with float switch
Water flow rate at 2m: 650 l/min
Head depth: 18 m
Maximum debris section: 45 mm
Pump revolutions: 2900 RPM
Max depth: 5 m.
Max liquid temperature: +40 °C
Pump body: Cast iron
Impeller: Cast iron
Motor casing: Stainless steel
Motor shaft: Stainless steel
Mechanical seal: n.1 Silicon carbide
Protection class: IP 68
Length: 200 mm
Width: 325 mm
Height: 475 mm
Net weight: 26 Kg
Are you looking for an electric pump with different technical characteristics? HERE you can find the section dedicated to GMP electric pumps or other specialized brands.
The images and technical data are not binding and may be subject to revisions by the manufacturer.
- Phase
- Single phase
- Frequency (Hz)
- 50
- Voltage (V)
- 230
- Engine rpm (rpm)
- 2900
- Protection degree
- IP68
- Pump type
- Submersible Pump
- Fluid type
- Clean water
- Height of suction (m)
- 18
- Maximum output capacity (Lt/min)
- 650
- Input power (W)
- 1500
- Main body material
- Cast Iron - Stainless Steel
- Float
- Yes
- Maximum use depth (m)
- 5
- Maximum height (m)
- 18
- Outlet diameter thread type (mm/inches)
- 100 mm - 4"
- Length (mm)
- 200
- Width (mm)
- 325
- Height (mm)
- 475
- Dry weight (Kg)
- 26