Phase Type : Three phase
Maximum three phase power : 6.8 KW / 8.5 KVA
Maximum single phase power : 3.2 KW / 4 KVA
Motor : Lombardini 12LD 477/2
Fuel : Diesel
Cylinders : 2
Displacement : 594 cm3
Maximum Engine Power : 17. 3 HP
Max Welding Current : 300-240 A at 35%/60%
Tank : 7 Lt
Sockets : 1 CEE 3-pole 230V socket, 1 CEE 5-pole 400V socket
Starting : Electric with battery
Acoustic Power : 77 dB(A) at 7 m
Voltage : 230 V / 400 V
Frequency : 50 Hz
Power Factor : 0. 8
Welding current : 35-400 A
Cooling : Air
Number of turns : 3000 rpm
Autonomy : 2.2 h
Consumption at 3/4 load : 3.2 L/h
Oil capacity : 2. 5 Lt
Alternator : SINCRO, with brushes
Number of Poles : 2
Number of Phases : 3
Welding voltage : 21.5 - 28.8 V
Power consumption : 11. 5 hp / 8.5 KW
Tension regulation : Compound
Width : 1100 mm
Length : 650 mm
Height : 800 mm
Weight : 240 Kg
CGM 300SDET is a threephase engine motorwelder equipped with a Lombardini 12LD 477/2 Diesel engine capable of delivering a power of 8,5KVA.
The CGMs are motorwelders equipped with Honda petrol or Lombardini diesel engines with electric or recoil start.
Mounted on a fixed base and operating at 3000 rpm, they are suitable for welding and supplying 400V threephase and/or 230V singlephase.
The CGM 300SDET engine driven welders of 3000 rpm are suitable for non-continuous emergency use, it is not recommended to use them for more than 6 continuous hours and for more than 500 hr/year.
TECHNICAL CHARACTERISTICS CGM 300SDET
Phase Type : Threephase
Maximum threephase output: 6.8 KW / 8.5 KVA
Maximum singlephase output: 3.2 KW / 4 KVA
Motor : Lombardini 12LD 477/2
Fuel : Diesel
Cylinders : 2
Displacement : 594 cm3
Maximum Engine Power : 17. 3 HP
Max Welding Current : 300-240 A at 35%/60%
Tank : 7 Lt
Sockets : 1 CEE 3-pole 230V socket, 1 CEE 5-pole 400V socket
Starting : Electric with battery
Acoustic Power : 77 dB(A) at 7 m
Voltage : 230 V / 400 V
Frequency : 50 Hz
Power Factor : 0. 8
Welding current : 35-400 A
Cooling : Air
Number of turns : 3000 rpm
Autonomy : 2.2 h
Consumption at 3/4 load : 3.2 L/h
Oil capacity : 2. 5 Lt
Alternator : SINCRO, with brushes
Number of Poles : 2
Number of Phases : 3
Welding voltage : 21.5 - 28.8 V
Power consumption : 11. 5 hp / 8.5 KW
Tension regulation : Compound
Width : 1100 mm
Length : 650 mm
Height : 800 mm
Weight : 240 Kg
Discover our wide range of motorwelding machines click here!
Images is technical data are not binding and may be subject to revision by supplier.
* Images and technical data are not binding. Please always consult the technical data sheet released by the manufacturer. Manel Service does not assume responsibility for any changes made by the manufacturer.
