TECNOGEN SH160E
OUT OF STOCK
Soldering at 60%: 110
Maximum single-phase power: 3.8 KVA
Fuel: Gasoline
Voltage: 230V
Engine: Honda GX270
Boosting: Electric
Length: 920 mm
Width: 520 mm
Height: 660 mm
Weight: 83 Kg
- Phase
- Single phase
- Maximum power single phase (KVA)
- 3.8
- Fuel
- Gasoline
- Frequency (Hz)
- 50
- Voltage (V)
- 230
- Engine
- HONDA GX270
- Engine rpm (rpm)
- 3000
- Starting system
- Elettrico
- Engine capacity (cm³)
- 270
- Number cylinders
- 1
- Cooling
- Air
- Welding current (A)
- 180 al 35% - 170 al 60%
- Fuel tank capacity (L)
- 6
- Consumption (L/h)
- Running time (h)
- 4
- Acoustic power
- 95 dB(A)
- Length (mm)
- 920
- Width (mm)
- 520
- Height (mm)
- 660
- Dry weight (Kg)
- 83
- Inverter
- No
- AVR
- No
- Compound
- No
- Silenced
- Yes
- Super silenced
- No
TECNOGEN SH160E MOTORWELDER 3,8KVA
TECNOGEN SH160E is a motorwelder equipped with a Honda GX270 gasoline engine, capable of delivering a singlephase power of 3.8KVA.
TECNOGEN SH160E is a motorwelder with a welding current from 120 to 160A max., with a gasoline engine at 3600 rpm max. air-cooled, in an open frame complete with recoil starter.
TECNOGEN SH160E features a rugged frame to protect a powerful HONDA GX270 motor capable of delivering 5KVA singlephase power with a maximum load consumption of 2.4 L/h.
TECNOGEN SH160 is with electric start with 12V battery supplied with acid or manual with self-winding, with control panel QM115 composed of single-phase CEE socket 2P+T 16A, thermal protection, singlephase Schuko socket 2P+T 16A.
TECHNICAL FEATURES TECNOGEN SH160E
Soldering at 60%: 110
Maximum single-phase power: 3.8 KVA
Fuel: Gasoline
Voltage: 230V
Engine: Honda GX270
Boosting: Electric
Length: 920 mm
Width: 520 mm
Height: 660 mm
Weight: 83 Kg
Are you looking for a motorwelding with different technical characteristics? Here you can find the full range of TECNOGEN and other specialized brands.
The images are purely indicative.
* Images and technical data are not binding. Please always consult the technical data sheet released by the manufacturer. Manel Service does not assume responsibility for any changes made by the manufacturer.
