GENSET MPM 6/230 KI - ENGINE DRIVEN WELDER 6 KVA INVERTER

MOTOR WELDING WITH ELECTRODE DC GENSET MPM 6-230KI THREEPHASE SINGLEPHASE 6 KVA INVERTER

GENSET MPM 6-230KI electrode and TIG motorwelder with 6 KVA singlephase STAGE V variable speed diesel engine with electric start and with Inverter voltage regulator.
Thanks to its compact size and very low weight, the GENSET MPM 6-230KI motorwelder is light and easy to transport.
The GENSET MPM 6-230KI also has a low fuel consumption: only 1.7 Lt/h at 75% of the load.
The GENSET MPM 6-230KI motorwelder, thanks to the high quality and efficiency of its components, is suitable for welding DC electrodes with a maximum diameter of 6 mm.

Main advantages of the GENSET MPM 6-230KI motorwelder 

CONTINUOUS CURRENT MOTOR WELDING 240A
WITH SINGLEPHASE ALTERNATED CURRENT GENERATOR
Silenced version
VARIABLE RPM STAGE V DIESEL ENGINE

Technical characteristics of the GENSET

Welding method: Electrode / Tig
Forced arc selector
Remote control socket
Fuel reserve indicator
Battery 12V built-in
Thermal protection
2 singlephase sockets CEE 230V - 16A
Engine oil extraction hose
Central lifting hook
Logic with digital display for reading the following parameters:
generator voltage, battery voltage, frequency, hour meter,
oil pressure, engine temperature, failure to start;
complete with automatic engine stop device with
alarm indication on the display in case of:
-low oil pressure
-high water temperature
- over/under alternator voltage
- over/under alternator frequency
Noise level: Lwa 93 (68 dB at 7 mt)
Welding current adjustment: electronic
Intermittance at 35%: 240A
Intermittance at 60%: 180A
Continuous adjustment: 20A - 240A
Trigger voltage: 90V
Maximum electrode diameter: 6 mm
Type: synchronous, permanent magnets (PMG)
Single-phase power (maximum): 6kVA - 230V
Power factor: cos ? 1
Kubota Z482 Diesel engine - STAGE V - 2 cyl. - 479 cm3
Maximum power: 10.2 HP (7.5 kWm)
Boosting: electric (12Vdc)
Cooling: water
Fuel consumption at 75% load: 1.7 lt/h
Isolation class: H
Environmental temperature: 40 °C (*)
Reference altitude: 1000 m (*)
Protection class: IP 23
Fuel tank capacity: 24 lt
Dimensions (L x W x H): 950 x 650 x 660 mm
Dry weight: 214 kg

Discover our wide range of motorwelding machines click here! 
Images and technical data are not binding.