Shopping Cart
There are no more items in your cart
PRAMAC W220 TDC 5.5KW Motor Welding Machine
LA220CH1000
Maximum single-phase output: 2.4 KW
Continuous use single-phase output: 2 KW
Maximum three-phase power: 5.5 KW
Continuous use three-phase power: 4. 16 KW
Fuel: Gasoline
Voltage: 230 V / 400 V
Frequency: 50 Hz
Motor: Honda GX390 Recoil
Start: Tear-off
Welding Current: 40-220 A
Min/max Welding Voltage: 21. 6 V / 28.8 V
Electrode diameter: 5 mm
Consumption: 2.2 at 75% load
Length: 875 mm
Width: 620 mm
Height: 600 mm
Weight: 80 Kg
- Phase
- Single phase / Three phase
- Maximum power single phase (KW)
- 2.4
- Continuous power single phase (KW)
- 1.8
- Maximum power single phase (KVA)
- 2.7
- Continuous power single phase (KVA)
- 2.3
- Maximum power three phase (KW)
- 5.5
- Continuous power three phase (KW)
- 4.47
- Maximum power three phase (KVA)
- 6.8
- Continuous power three phase (KVA)
- 5.6
- Fuel
- Gasoline
- Frequency (Hz)
- 50
- Voltage (V)
- 230 / 400
- Sockets configuration
- 1 x 400V 16A 3P+T CEE - 1 x 230V 16A 2P+T CEE - 1 x 230V 16A SCHUKO
- Engine
- Honda GX390 Recoil, naturally aspirated
- Speed governor
- Mechanical
- Starting system
- Pull starter
- Engine capacity (cm³)
- 389
- Oil capacity (L)
- 1.1
- Cooling
- Air
- Protection degree
- IP23
- Welding current (A)
- 40-220
- Welding voltage min/max (V)
- 21.6 / 28.8
- Diameter electrodes (mm)
- 5
- Fuel tank capacity (L)
- 6.1
- Consumption (L/h)
- 0,8 al 75% del carico
- Running time (h)
- 2.8 at 75% of the load
- Acoustic power
- 97 dB(A)
- Acoustic pressure
- 72 dB(A) at 7 m
- Length (mm)
- 875
- Width (mm)
- 620
- Height (mm)
- 600
- Dry weight (Kg)
- 80
- Silenced
- No
- Super silenced
- No
- ATS Switch device
- No ATS
- Voltage regulator
- No
- Engine manufacturer
- Honda
- Brand
-
![PRAMAC](data:image/svg+xml,%3Csvg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 16 9" width='16' height='9' %3E%3C/svg%3E)
PRAMAC W220 TDC ENGINE-DRIVEN WELDER 5.5 kW
PRAMAC W220 TDC is a light, compact engine-driven welder, equipped with a Honda GX390 recoil gasoline engine capable of delivering 5.5 kW.
PRAMAC engine-driven welders are the ideal choice for small repairs or more demanding craft applications. With 220 A output, you can use rutile, basic, or cellulosic electrodes up to 5 mm in diameter.
Mechanical adjustment of welding current.
Reliability, sturdiness, and low noise to meet every need.
Technical features PRAMAC W220 TDC:
Single-phase max power: 2.4 kW
Single-phase continuous power: 2 kW
Three-phase max power: 5.5 kW
Three-phase continuous power: 4.16 kW
Fuel: Gasoline
Voltage: 230 V / 400 V
Frequency: 50 Hz
Engine: Honda GX390 (recoil)
Starting: Recoil
Welding current: 40–220 A
Welding voltage min/max: 21.6 V / 28.8 V
Electrode diameter: 5 mm
Consumption: 2.2 at 75% load
Length: 875 mm
Width: 620 mm
Height: 600 mm
Weight: 80 kg
If you are looking for a product with similar features, CLICK HERE. You will find the entire dedicated category.
* Images and technical data are not binding. Please always consult the technical data sheet released by the manufacturer. Manel Service does not assume responsibility for any changes made by the manufacturer.
Complete your order with:
16 other products in the same category:
€2,076.00 Tax included
€2,076.00 Tax excluded
€13,566.94 Tax included
€13,566.94 Tax excluded
€2,580.00 Tax included
€2,580.00 Tax excluded
€10,155.00 Tax included
€10,155.00 Tax excluded
€2,153.00 Tax included
€2,153.00 Tax excluded
€4,740.00 Tax included
€4,740.00 Tax excluded
€3,254.00 Tax included
€3,254.00 Tax excluded
Tap to zoom
