GENSET WELDBABY 180I MOTORWELDING FROM 1 KVA INVERTER ENGINE HONDA STAGE V
GENSET WELDBABY 180i electrode welding machine with Honda gasoline engine of 4000 rpm stage V single-phase 1 KVA with manual start and with Inverter voltage regulator.
Thanks to its compact size and very low weight, the GENSET WELDBABY 180i is a lightweight and easy-to-transport motor welder.
The GENSET also has a low fuel consumption: only 1.8 Lt/h at 75% load.
Thanks to the high quality and efficiency of its components, this motor welder is suitable for welding DC electrodes with a maximum diameter of 4 mm.
The GENSET WELDBABY 180i has a low fuel consumption of only 1.8 Lt/h at 75% load.
WELDING MACHINE WITH INVERTER
CONTINUOUS CURRENT OF 165 A
WITH SINGLE-PHASE ALTERNATED CURRENT GENERATOR
BENZINE ENGINE 4000 RPM/MIN STAGE V
Technical characteristics of the GENSET WELDBABY 180i motor welder
Welding method: Electrode
Automatic stop for low oil level
1 single-phase CEE 16 A 110 V AC outlet
1 single-phase CEE 16 A 230 V AC outlet
Thermal protection
Automatic return to idle speed in the absence of load
Acoustic power Lwa 98 (73 dB at 7 mt)
DC welding
Intermittance at 60%: 165 A - 24 V
Current adjustment: 40 A - 165 A
Trigger voltage: 70 V
Maximum electrode diameter: 4 mm
Synchronous 50 Hz AC generator, permanent magnets (PMG)
Single-phase power: 1 kVA - 230 V AC
Single-phase power: 0.5 kVA - 110 V AC
Power factor: cos ф 1
Petrol engine 4000 rpm
Type: Honda GX 200 OHV - STAGE V - 1 cyl. - 7,2 HP (5,3 kWm) - 196 cm3
Cooling: air
Start: pull-wire
Fuel tank capacity: 3,8 lt
Fuel consumption at 75% load: 1,8 lt/h
Isolation class: H
Environmental temperature: 40 °C (*)
Reference altitude: 1000 mt (*)
Protection class: IP 23
Dimensions (L x W x H): 510 x 440 x 460 mm
Dry weight: 35 kg
For more information on this and similar products please feel free to contact us.
Images and technical data not binding.
SHARE
