FINI PULSAR EVO BK120-500-10-SD COMPRESSOR 10HP

FINI PULSAR EVO BK120-500-10-SD is a silenced compressor with a capacity of 500 l and can deliver a maximum pressure of 10 bar by means of a BK120 pump with a power of 7.5KW.

The life and efficiency of the compressor is largely determined by the number of revolutions per minute of the head. The lower the rpm, the longer the life of the compressor. The speed reduction is achieved by means of pulleys of different diameters applied to the motor and the head respectively.

The induction motor is characterized by its long life and low maintenance requirements. In fact, this motor has no brushes, the main component subject to wear in electric motors. The motor of the FINI PULSAR EVO is covered with sound-absorbing panels that reduce the noise level, allowing the use of the compressor even in difficult rooms. 

The FINI PULSAR EVO is fsupplied complete with pressure regulator with double compressed air outlet, 500L tank. The FINI PULSAR EVO, thanks to its pumping group, can deliver a power of 10Hp - 7500W. Equipped with 2 cylinders, its maximum pressure is 10 bar, it is lubricated and its motor reaches a speed of 1100rpm.

TECHNICAL FEATURES FINI PULSAR EVO BK120-500-10-SD

Voltage: 400 V
Frequency: 50 Hz
Pump: BK120
Capacity cylinder: 500 l
Revolutions: 1100 RPM
Power: 7.5 KW - 10 HP
Air output: 1080 Lt/min - 38. 1 cfm
Pressure: 10 bar - 145 psi
BSP: 2'
Acoustic pressure: 64 dB(A)
Length: 2005 mm
Width: 970 mm
Height: 1660 mm
Weight: 412 Kg

If you are looking for another product then you can see on our catalog other compressors FINI or other specialized brands.

Images and technical data are not binding and may be subject to revision by the manufacturer.