SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE

UVC30D3
      SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE
      SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE
      SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE

      Maximum flow rate: 1.5 m3/Hr - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/Hr - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
      Lamps: 1x30W, life hours 9,000
      Reactor dimensions: Total H: 450 mm - Ø 60.30 mm
      Form Factor: "C"-shaped tube
      Working position: Vertical / Horizontal
      Hydraulic connections: ¾" male threaded
      Maximum pressure: 10 Bar standard
      Material: AISI 304 (AISI 316 optional)
      Panel dimensions: 180 x 180 x 90 mm
      Display: White/blue backlit LCD display 2x8 characters
      consumption: 30 Watts Power supply: 230 Vac ± 10% @ 50/60 Hz
      product dimensions: 450 x 60.30 mm

      Prezzo
      478.00 € tax excl.
      583.16 € tax incl.
      Shipping from 36.60 € to Italy buy it today.
      Calculate Shipping Cost
      Ask a question

      I authorize the processing of data pursuant to Legislative Decree 196/2003. I declare that I have read the Privacy Policy*

      Offer on letterhead
      SATEPA
      UVC30D3

      Data sheet

      Frequency (Hz)
      50 / 60
      Protection degree
      IP54
      Pressure (bars)
      10
      Product dimensions (mm)
      450 x 60,30
      Lamps
      1 x 30W
      Power consumption (W)
      30
      Capacity (Lt/h)
      1200 - 1500
      Output voltage (VAC)
      230
      Reactor Dimensions
      H total: 450 mm - Ø 60,30 mm
      Form
      C-shaped tube
      job position
      Vertical / Horizontal
      lamp control
      Gestione singola lampada con allarme fine vita lampada attraverso led/relè

      Specific References

      SATEPA UV Sterilizer MONO UVC30D3 - Display UV CUBE

      SATEPA UV Sterilizer UVC30D3 - Display UV CUBE is a device designed for the disinfection of drinking and industrial water using UV-C radiation. Its effectiveness is based on the emission of UV-C radiation at a wavelength of 254 nm,
      capable of inactivating pathogenic microorganisms such as bacteria, viruses and protozoa..
      Advantages SATEPA UV Sterilizer UVC30D3:
      High disinfection effectiveness: Eliminates pathogenic microorganisms
      Safe and environmentally friendly: Does not use chemicals harmful to the environment
      Low energy consumption: Reduces operating costs
      Low maintenance: Easy to install and operate
      Versatility: Suitable for a wide range of applications

      Key Features SATEPA UV Sterilizer UVC30D3:

      Maximum flow rate: 1.5 m3/Hr - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/Hr - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
      Lamps: 1x30W, life hours 9,000f
      Reactor dimensions: Total H: 450 mm - Ø 60.30 mm
      Form Factor: "C"-shaped tube
      Working position: Vertical / Horizontal
      Hydraulic connections: ¾" male threaded
      Maximum pressure: 10 Bar standard
      Material: AISI 304 (AISI 316 optional)
      Panel dimensions: 180 x 180 x 90 mm
      Display: White/blue backlit LCD display 2x8 characters
      Lamp Control: Management with end-of-life lamp alarm through LEDs/relays Counts:
      Counts: Total plant life hour count Resettable partial lamp life count.
      Controls: Stand By control with "OK" button Remote ON/OFF control Lamp on mode with water flow Solenoid valve closing mode in case of lamp off Customizations: Customizable input signal
      Alarms: Dry contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac IP rating: IP 54 (IP 65 optional) Power consumption: 30 Watts Power supply: 230 Vac ± 10% @ 50/60 Hz
      Product dimensions: 450 x 60.30 mm
      Invest in a safe and healthy future with the UVC30D3 UV Sterilizer - UV CUBE Display from SATEPA

      Looking for a SATEPA UV Sterilizer UVC30D3 - Display UV CUBE with different features? Click HERE.

      Images and technical data purely indicative.

      * Images and technical data are not binding. Please always consult the manufacturer's technical data sheet. Manel Service assumes no responsibility for any changes made by the manufacturer or any typographical errors.

      4 other products in the same category:

      SATEPA UV Steriliser MONO UVC30D3 | Manel Service

      SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE

      Prezzo
      478.00 € tax excl.
      583.16 € tax incl.