SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE

SATEPA UV Steriliser MONO UVC30D3 | Manel Service
SATEPA UV Steriliser MONO UVC30D3 | Manel Service
SATEPA UV Steriliser MONO UVC30D3 | Manel Service
SATEPA UV Steriliser MONO UVC30D3 | Manel Service
UVC30D3

Maximum flow rate: 1.5 m3/Hr - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/Hr - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
Lamps: 1x30W, life hours 9,000
Reactor dimensions: Total H: 450 mm - Ø 60.30 mm
Form Factor: "C"-shaped tube
Working position: Vertical / Horizontal
Hydraulic connections: ¾" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Panel dimensions: 180 x 180 x 90 mm
Display: White/blue backlit LCD display 2x8 characters
consumption: 30 Watts Power supply: 230 Vac ± 10% @ 50/60 Hz
product dimensions: 450 x 60.30 mm

Download Scheda Tecnica UVC30D3
 
Frequency (Hz)
50 / 60
Protection degree
IP54
Pressure (bars)
10
Product dimensions (mm)
450 x 60,30
Lamps
1 x 30W
Power consumption (W)
30
Capacity (Lt/h)
1200 - 1500
Output voltage (VAC)
230
Reactor Dimensions
H total: 450 mm - Ø 60,30 mm
Form
C-shaped tube
job position
Vertical / Horizontal
lamp control
Gestione singola lampada con allarme fine vita lampada attraverso led/relè
Brand

SATEPA UV Sterilizer MONO UVC30D3 - Display UV CUBE

SATEPA UV Sterilizer UVC30D3 - Display UV CUBE is a device designed for the disinfection of drinking and industrial water using UV-C radiation. Its effectiveness is based on the emission of UV-C radiation at a wavelength of 254 nm,
capable of inactivating pathogenic microorganisms such as bacteria, viruses and protozoa..
Advantages SATEPA UV Sterilizer UVC30D3:
High disinfection effectiveness: Eliminates pathogenic microorganisms
Safe and environmentally friendly: Does not use chemicals harmful to the environment
Low energy consumption: Reduces operating costs
Low maintenance: Easy to install and operate
Versatility: Suitable for a wide range of applications

Key Features SATEPA UV Sterilizer UVC30D3:

Maximum flow rate: 1.5 m3/Hr - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/Hr - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
Lamps: 1x30W, life hours 9,000f
Reactor dimensions: Total H: 450 mm - Ø 60.30 mm
Form Factor: "C"-shaped tube
Working position: Vertical / Horizontal
Hydraulic connections: ¾" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Panel dimensions: 180 x 180 x 90 mm
Display: White/blue backlit LCD display 2x8 characters
Lamp Control: Management with end-of-life lamp alarm through LEDs/relays Counts:
Counts: Total plant life hour count Resettable partial lamp life count.
Controls: Stand By control with "OK" button Remote ON/OFF control Lamp on mode with water flow Solenoid valve closing mode in case of lamp off Customizations: Customizable input signal
Alarms: Dry contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac IP rating: IP 54 (IP 65 optional) Power consumption: 30 Watts Power supply: 230 Vac ± 10% @ 50/60 Hz
Product dimensions: 450 x 60.30 mm
Invest in a safe and healthy future with the UVC30D3 UV Sterilizer - UV CUBE Display from SATEPA

Looking for a SATEPA UV Sterilizer UVC30D3 - Display UV CUBE with different features? Click HERE.

Images and technical data purely indicative.

* Images and technical data are not binding. Please always consult the technical data sheet released by the manufacturer. Manel Service does not assume responsibility for any changes made by the manufacturer.

11 other products in the same category:

Product added to wishlist
Product added to compare.