BINDA LWG2 Motor pump 660 Litres per minute

LWG2 motor pump with a maximum flow rate of 660 litres/minute, with a maximum head of 24 metres and a suction height of 7 metres.
The LWG2 660 litres per minute motor pump is self-priming monobloc open impeller with 4-stroke petrol engine.
The built-in check valve of the suction inlet prevents the siphon effect from stopping and ensures automatic re-priming, at each start the pump will re-prime even if only partially filled with liquid and with the suction hose completely empty.
Used in the drainage of clean or slightly dirty water, in flow irrigation and drainage works.

Technical data of LWG2 660 litres per minute:
Suction delivery: 50 mm - 2''.
Engine revs: 3200 rpm
Maximum flow rate: 660 Lt/1'
Maximum head: 24 m
Suction height: 7 m
Engine: Loncin, 4-stroke
Fuel: Gasoline
Tank capacity: 3.6 Lt
Starting: manual
Length: 550 mm
Width: 430 mm
Height: 390 mm
Weight: 32 Kg

If you are looking for motor pumps similar to the LW100 1600 liters/minute but with different technical characteristics then we suggest you to browse our wide catalogue reserved to motor pumps.
The wide proposal of our range includes motor pumps of the best brands and allows you to meet all needs: watering, watering, emptying a ditch, a swimming pool, a pond or an excavation site. The motor pumps you can buy are also perfect in emergency situations.
The motor pumps can be gasoline or diesel powered, and depending on its use are in fact available with the following types: high flow, portable, high pressure, self-priming with simple effect.

Images and technical data are not binding.