FINI PULSAR K30 T5,5 SD PUMP GROUP 5.5HP

FINI PULSAR K30 T5,5 SD is a super silenced compressor that can deliver a maximum pressure of 11 bar by means of a K30 pump with a power of 4KW.

FINI PULSAR K30 T5,5 SD have been designed to solve the problem of noise in working environments, they stand out on the market for the lowest noise level in their category. These compressors have the advantage of being positioned close to the application position thanks to their extremely compact dimensions and the very low noise level.  

The duration and efficiency of the pumping unit is largely determined by the number of revolutions per minute of the head. The lower the number of revolutions, the longer the life of the compressor will be. The multiplication of the number of revolutions is obtained by means of pulleys of different diameters applied to the motor and the head respectively.

FINI PULSAR is characterized by the frontal electronic card of self-diagnosis, which allows the user to verify the integrity and the correct functioning of the machine.

The motor of the FINI PULSAR is covered with soundproof panels that reduce the noise level, allowing the use of the compressor even in uncomfortable rooms.

TECHNICAL FEATURES FINI PULSAR K30 T5,5 SD

Voltage: 400 V
Frequency: 50 Hz
Pump: K30
RPM: 1000 RPM
Power: 4 KW - 5.5 HP
Air output: 727 Lt/min - 25. 7 cfm
Pressure: 11 bar - 160 psi
BSP: 2'
Acoustic pressure: 65 dB(A)
Length: 870 mm
Width: 640 mm
Height: 1235 mm
Weight: 183 Kg

If you are looking for another product then you can see on our catalog other compressors FINI or other specialized brands.