FOR MARINE GENERATING SETS

9-pin connector kit and remote control plate.

VTE EXHAUST TO SEA Sea discharge (Ø 40).

Product for Paguro 2000 and Paguro 3000

15 meter cable with connector.

OUT OF PRODUCTION and was replaced by: REMOTE CONTROL CONNECTOR AND PLATE KIT 8-pin male connector

VTE PAGURO ADDITIONAL INTERMEDIATE MUFFLER Additional intermediate silencer for Paguro marine generators.

VTE PAGURO ANTI-SIPHON MUFFLER Ø40

VTE PAGURO ANTI-SIPHON MUFFLER WITH INTERMEDIATE SILENCER Anti-siphon muffler with intermediate silencer (Ø 40/45/50)

VTE PAGURO ANTI-VIBRATION MOUNT KIT Additional anti-vibration kit for damping support not provided.

VTE PAGURO ANTISIPHON VALVE Anti-siphon valve (for generators installed below the waterline of the boat).

VTE PAGURO AUTOMATIC SWITCH GENERATOR/DOCK 5KVA Automatic switch generator/dock (for generators up to 5KVA).

VTE PAGURO AUTOMATIC GENERATOR/BENCH SWITCH 6-18 KVA

VTE PAGURO AUTOMATIC START Automatic start from discharged batteries, with timers, thermostat, etc...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 12; - n.2 meters seawater inlet hose Ø14 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve <5 KVA - No.1 hydraulic closing silencer with intermediate silencer Ø40.5/45.5/50.5 mm; - n.1 end...

- No.1 sea water inlet 3/4''; - n.1 3/4'' faucet; - No.1 double brass screw 3/4''; - n.1 3/4'' raw water filter; - No.1 male hose connector 3/4'' x 25; - n.2 meters seawater inlet hose Ø25 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP60; - n.1 final feto silencer LT 60 Ø60; - No.1 hull...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 20; - n.2 meters seawater inlet hose Ø20 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP45 with rotary inlet; - no.1 feto end silencer LT 45...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 20; - n.2 meters seawater inlet hose Ø20 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP60; - n.1 final feto silencer LT 60 Ø60; - No.1 hull...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 20; - n.2 meters seawater inlet hose Ø20 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP40 with rotary inlet; - no.1 final feto silencer LT 40...

- No.1 sea water inlet 3/4''; - n.1 3/4'' faucet; - No.1 double brass screw 3/4''; - n.1 3/4'' raw water filter; - No.1 male hose connector 3/4'' x 25; - n.2 meters seawater inlet hose Ø25 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP60; - n.1 60mm drain/water 50mm separator + water through...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 20; - n.2 meters seawater inlet hose Ø20 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP45 with rotary inlet; - no.1 drain 45mm / water 38mm...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 20; - n.2 meters seawater inlet hose Ø20 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA - No.1 plastic water lock type LP60; - n.1 60mm drain/water 50mm separator + water through...

INSTALLATION KIT WITH GAS/WATER SEPARATOR - No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - No.1 male hose connector 1/2'' x 12; - n.2 meters seawater inlet hose Ø14 mm; - n.4 hose clamp 20-32/12; - no.1 siphon rupture valve <5 KVA) - No.1 hydraulic closing...

- No.1 sea water inlet 1/2''; - n.1 1/2'' faucet; - No.1 double brass screw 1/2''; - n.1 raw water filter 1/2''; - n.1 male flexible connector 1/2'' x 20; - n.2 meters inlet hose Ø20 mm; - n.6 hose clamp 20-32/12; - no.1 siphon rupture valve >5 KVA. - No.1 plastic water lock type LP40 with rotary inlet; - No.1 hull connection, elbow and...

VTE PAGURO ISOLATED NEGATIVE 5KVA Isolated negative for metal boats

VTE PAGURO MANUAL GENERATOR/BENCH SWITCH Manual switch generator/dock for panel installation.

VTE PAGURO R.I.Na APPROVED RUBBER EXHAUST HOSE (4 meters) R.I.Na approved rubber exhaust hose (4 meters) for Paguro marine generators.

Weight: 290 gr Electronic degree of protection: IP65 Degree of protection terminal blocks: IP65 Operating temperature: -10 - 60 °C Power supply: 8 / 30 V DC Fixed consumption: 122 mA + alternator pre-excitation Display: 128x64 graphic LCD with white backlighting Keys for the interface with the device: 4

Weight: 290 g Electronic protection: IP65 Terminal block protection rating: IP65 Operating temperature: -10 - 60 °C Power supply: 8/30 V DC Fixed consumption: 122 mA + alternator pre-excitation <p...

VTE PAGURO SEA WATER INTAKE KIT Seawater inlet kit, ball valve, and cooling water filter for Paguro marine generators.

PZ. 1 OIL FILTER ASSY PZ. 1 AIR FILTER ELEMENT PZ. 1 WATER PUMP IMPELLER  PZ. 1 BELT FOR WATER PUMP PZ. 1 FUEL FILTER

PZ. 1 OIL FILTER ASSY PZ. 1 AIR FILTER ELEMENT PZ. 1 WATER PUMP IMPELLER  PZ. 1 BELT FOR WATER PUMP PZ. 1 FUEL FILTER

PZ. 1 OIL FILTER ASSY PZ. 1 AIR FILTER ELEMENT PZ. 1 WATER PUMP IMPELLER  PZ. 1 BELT FOR WATER PUMP PZ. 1 FUEL FILTER

PZ. 1 OIL FILTER ASSY PZ. 1 AIR FILTER ELEMENT PZ. 1 WATER PUMP IMPELLER  PZ. 1 BELT FOR WATER PUMP PZ. 1 FUEL FILTER

PZ. 1 OIL FILTER ASSY PZ. 1 AIR FILTER ELEMENT PZ. 1 WATER PUMP IMPELLER  PZ. 1 BELT FOR WATER PUMP PZ. 1 FUEL FILTER