SCHENKER ZEN 100 TOUCH WATERMAKER WITH CAPACITY 100 LT/H

The Schenker ZEN 100 TOUCH marine watermaker is a quiet, compact, lightweight, efficient, and convenient system. It can be installed in any position, either horizontally or vertically. The flow rates indicated are nominal and may vary by ±20% depending on actual operating conditions. The power consumption of the Schenker ZEN 100 TOUCH is up to 80% lower compared to traditional systems. For example, to produce 100 liters/hour of fresh water, only 400 W are required. The normal engine recharge is therefore more than sufficient to replenish the energy consumed, without the need for a generator.

Thanks to its extremely low power consumption, the Schenker ZEN 100 TOUCH can be powered directly from the batteries and can also be installed without a generator.

The use of the Schenker ZEN 100 is extremely simple, as no manual adjustments are required. All systems are equipped with automatic pressure regulation, and all functions are controlled remotely via the control panel. The Schenker ZEN 100 does not use high-pressure pumps, ensuring extremely quiet operation and no vibrations.

The parts of the watermaker in contact with seawater are mainly made of carbon fiber or acetal resin, making the system completely corrosion-free. In the 2.0 systems, all components subject to wear, such as o-rings and traditional hydraulic seals, have been eliminated. Sealing and sliding elements are made with innovative nanotechnology pads, offering abrasion resistance up to 15 times higher than steel.

Schenker units, unlike traditional systems that use high-pressure pumps, employ the patented ENERGY RECOVERY SYSTEM ®, which amplifies the pressure provided by low-pressure pumps, ensuring extremely high energy efficiency. The typical consumption of a Schenker watermaker is only 4 Watts per liter. The ERS is specifically designed for marine applications and is built with materials completely resistant to brackish water. Moving parts are minimized thanks to the patented solution that eliminates the need for pilot valves.

The Schenker ZEN 100 TOUCH marine watermaker kit includes:

• Watermaker with Energy Recovery System
• Feed pump with seawater filter
• Activated carbon filter with solenoid valve
• Seawater intake strainer
• Filter wrench
• Non-return valve
• Freshwater production hose (5 meters)
• Remote control panel
• Installation kit (assortment of screws and fittings)
• User manual

Technical specifications Schenker ZEN 100 TOUCH:

Power: 400 W
Power supply: 12 / 24 / 48 VDC or 230 VAC
Flow rate: 100 L/h
Membranes: 2 x 4'' x 21''
Control panel: Digital touch screen
Length: 727 mm
Width: 196 mm
Height: 520.5 mm
Weight: 53 kg

Standard functions:

• Automatic pressure regulation
• High-pressure shutdown

Remote control functions:

• Remote start/stop
• Watermaker flushing
• Timed operation

Looking for a marine watermaker similar to the SCHENKER ZEN 100 TOUCH but with different features? CLICK HERE to explore our full range.