LARIUS SE9011 ELECTRIC PISTON PUMP FOR SANITIZERS

LARIUS SE9011 ELECTRIC PISTON PUMP FOR SANITIZING ATOMISATION.
The LARIUS SE9011 electric pump for sanitizing agents is suitable for intensive use: high pressure electric piston pump (210 Bar) and flow rate for medium-large environments, such as offices, industrial sheds, schools, tensile structures, common areas of condominiums, buses, vans, trucks, small and medium boats.

LARIUS SE9011 is a sprayer suitable for use in dangerous and heavy duty environments; exceptional in fighting pathogens such as bacteria, moulds and viruses.

CHARACTERISTICS OF THE LARIUS SE9010 ELECTRO PISTON SPRAYER FOR SANITIZING AGENTS

- Stainless steel pump with PE and PTFE seals
- Can be used with 200lt drums, 1000lt IBCs and small cans.
- Possibility to adjust the fluid pressure
- Can be used with two pipes at the outlet.
- Self-priming pump.
- LARIUS SE9010 is equipped with trolley for easy transport.
- Select suction, hose and gun accessories in the accessories section.

Type of material treated: Sanitizers to fight moulds, viruses and bacteria
Phase type: Single-phase
Voltage: 220V
Frequency: 50 Hz
Engine power: 2 Kw
Maximum Fluid Pressure: 210 Bar
Maximum flow rate: 4 litres per minute
Materials in contact with the fluid: AISI 303 and 420 stainless steel, PTFE, polyethylene and tungsten carbide.

Materials in contact with the fluid: AISI 303 and 420 stainless steel, PTFE, Polyethylene and tungsten carbide.
Model SE9011 . Pneumatic piston pump 30:1, ATEX certified.

THE LARIUS SE9000 PISTON PUMP FOR SANITIZERS SUPPORTS THE FOLLOWING ACCESSORIES:

Mod LARIUS SE9050
High pressure spray gun, max 250 bar. Includes spray nozzle (mod SFC 13 60) and 1/4" swivel fitting to connect to the hose.
Mod LARIUS SFC 13-60 Sanitizing spray nozzle. Included in the gun and PLA lances.

Extensions for LARIUS gun
Mod 155. Length 60 cm
Mod 156. Length 100 cm

Gun LARIUS PLA
Ideal application lance to reach high places and difficult to access; with closure at the end of the extension to avoid product loss. Lance equipped with Z-fitting for nozzle positioning. Nozzle SFC 13 60 included
Mod SE9060. PLA gun, length 130 cm
Mod SE9061. PLA gun, length 180 cm
Mod SE9062. PLA gun, length 240 cm

LARIUS SE9011 SUPPORTS THE FOLLOWING HIGH-PRESSURE HOSES
High Pressure Hoses 1/4" - 228 bar

18024 15 m
18024/20 20 m
18024/25 25 m
18024/30 30 m

The image is for indicative purposes only