ACCESSORIES / SPARE PARTS

PT100 ON N-END BEARING MXB-E 225 FOR DOUBLE BEARING CONFIGURATION THIS ITEM CAN BE PURCHASED ONLY AND EXCLUSIVELY IN COMBINATION WITH THE MARELLI GENERATORI MXB-E 225

PT100 ON N-END BEARING MXB-E 250 THIS ITEM CAN BE PURCHASED ONLY AND EXCLUSIVELY IN COMBINATION WITH THE MARELLI GENERATORI MXB-E 250

PT100 ON N-END BEARING MXB-E 250 FOR DOUBLE BEARING CONFIGURATION THIS ITEM CAN BE PURCHASED ONLY AND EXCLUSIVELY IN COMBINATION WITH THE MARELLI GENERATORI MXB-E 250

QS1P Minicage ATS FRAME PREPARATION

IP42 - supplied separately - with terminals and without cable

SELLABLE IN WITH GENMAC GENERATOR Quick coupling for external tank

Addictional features for R.I.Na homologation Engine: Jacketed fuel pipes leakage sender jacketed fuel pipes Very low oil pressure sender Electric board front side: Fresh water pressure gauge Fuel pressure gauge Exhaust gas temperature gauge Local/remote starting switch Alarm instrument Emergency push button Buzzer silenting<br...

RADIOCONTROL for models with electric start and control panel

SELLABLE IN WITH GENMAC GENERATOR RADIOCONTROL for models with electric start and control panel

CONVERSION WIRING 6' / 1.8M

Reducer for MINI CO2 cylinder

Reducer for MisterWork cylinder - 30 Lt/min

5A AC charger for your RemigoOne electric outboard motor. Certified charger built specially for charging RemigoOne in a fast and secure way. Input voltage range between 120 – 240V, charging time 6 hours.

Carrying bag for electric outboard RemigoOne is not a regular one – it embodies the concept of sustainability. Bag and backpack in one, for safe storage and carrying. It’s robust tarp shell will keep your new outboard safe everywhere. We designed this carrying bag using residual material gathered from our local industries, following circular design principles. For shells, we use...

DC 2A charger for RemigoOne electric outboard motor. Certified charger built specially for charging RemigoOne on boat in a secure way. You can use any low voltage (12-24V) DC source for charging – also solar panels or an on-board generator. It will recharge RemigoOne in 12 hours.

Super fast 9A AC charger for RemigoOne electric outboard motor. Certified charger built specially for fast-charging RemigoOne in a secure way. It recharges RemigoOne in only  3 hours!  Input voltage range between 120 – 240V.

Magnetic killswitch for RemigoOne electric outboard motor serves as a turn on/off key and a magnetic killswitch. You simply attach the safety cord around your driving hand’s wrist for safety and steer using the two buttons on the interface. Then attach the magnetic...

Spare propeller for your RemigoOne electric outboard motor. Plastic 12” propeller was built specially for RemigoOne – designed for maximized efficiency. What’s included in the price: plastic propeller with safety pin. For safe removal and application follow the easy instructions in the manual you received along with your RemigoOne electric outboard.

REMOTE CONTROL

SELLABLE IN WITH GENMAC GENERATOR REMOTE CONTROL BY CABLE

9-pin connector kit and remote control plate.

Remote Panel Automatic Duplex Version This accessory can be used only in combination with a desalinator of the IDROMAR line.

ROAD-LEGAL TWIN-AXLE TROLLEY WITH ARTICULATED TILLER ARM GP165 TO BE REGISTERED

25 Ampere Voltage: 380 V Phase type: three-phase

CONVERSION WIRING 6' / 1.8M

PRODUCT NOT SELLABLE SINGULARLY Battery Type: CAS LI-POWER Battery Capacity: 5200 mAh Battery Voltage: 18 V Compatibility: CAS Battery Charger Length: 121 mm Width: 80.5 mm Height: 66 mm Net Weight: 0.67 kg

PRODUCT NOT SELLABLE SINGULARLY Cable: 1.35m 2x0.75mm2 Ho3V VH2-F Voltage: 220-240Vac Frequency: 50/60Hz Maximum Power Consumption: 30 W Compatibility: CAS 12V-18V Battery Input Protection: IP20 Impact Protection: IK07 Operating Temperature: -10°C to +40°C Length: 150 mm Width: 140 mm Height: 75 mm Net Weight:...

PRODUCT NOT SELLABLE SINGULARLY UNLIMITED LIGHT AVAILABILITY WITH THE CONNECT WORK LIGHT POWER SUPPLY The new CONNECT power supply replaces the old power supply that only worked with CAS work lights. The new CONNECT power supply works with both CONNECT work lights and CAS lights. Technical Specifications Cable: 5m / 2x0.75 mm2 H05RN-F<br...

Smart CONNECTOR designed to use 18 V/20 V battery packs on SCANGRIP CONNECT work lights. Whatever brand of power tools you prefer, SCANGRIP has developed a unique CONNECTOR for each brand that fits 18 V/20 V battery packs. Simply mount the CONNECTOR on the work lamp, connect the battery pack, and you are ready to work. Length: 110.13 mm Width: 76.06 mm Height: 38.32...

Frame diameter: 1.2 m Maximum height: 3 m Minimum height: 1.35 m Net weight: 6 kg Maximum load: 10 kg

Net weight (kg): 0.24 Length (mm): 120.00 Width (mm): 40.00 Height (mm): 52.00

Length: 1110 mm Width: 145 mm Height: 140 mm Net Weight: 6 kg Max load:...