GENSET MG 5000 I-BE GENERATOR 5 KVA SINGLE PHASE STAGE V
MG 5000 I-BE - C
Type of phase: Single-phase Maximum power: 5 KVA / 4 KW Continuous power: 4.5 KVA / 3.6 KW VAC voltage: 230 V Frequency (Hz): 50 Starting panel: Manual with wrap-around car Engine: Briggs & Stratton XR1450 Emissions regulations: Stage V Revolutions per minute RPM: 3000 Fuel: Petrol Tank capacity: 5.3 l Voltage regulator: Condenser (AVR OPTIONAL) Consumption @ 75% load: 2.5 l / h Autonomy @ 75% load: 2.1 h Sound pressure: 73 dB (A) @ 7m Length: 770 mm Width: 480 mm Height: 625 mm Net weight: 62 Kg
List price
1,952.00 € tax incl.
1,600.00 € tax excl.
Discounted Price
1,094.34 € tax incl.
897.00 € tax excl.
Shipping from 36.60 € to Italy buy it today. tax incl.
Calculate Shipping Cost
Shipping:
to
via
The selected carrier does not apply to this product
GENSET MG 5000 I-BE GENERATOR 5 KVA SINGLE PHASE STAGEV
The GENSET MG 5000 I-BE single-phase generator is equipped with a Briggs & Stratton XR1450 StageV petrol engine capable of delivering a power of 5 KVA with capacitor voltage regulator (AVR Optional) .
The GENSET MG 5000 I-BE single-phase generator provides reliable power for home, business and leisure environments Safely powering home appliances and other electronic devices Outdoor party.
The GENSET MG 5000 is easy to install and operate, just as simple are starting and stopping thanks to the clear and intuitive controls (recoil start).
OPTIONAL AVR
The purpose of the AVR, in a power source, is to keep the output stable. And if its operation is very simple when resistive loads are supplied, the situation is more complex in the case of mainly inductive loads: the delayed phase-shifted current contrasts the inductor magnetic field, causing a voltage drop at the alternator output terminals. ; to compensate for the phenomenon, the AVR intervenes automatically by increasing the excitation current, until the output returns to the nominal value. If the load is instead capacitive, the current acts as a magnetizer for the inductor causing an increase in the output voltage, and the AVR intervenes by reducing the excitation current
STAGEV EMISSIONS REGULATION
GENSET MG 5000 I-BE is equipped with a "mobile" STAGEV motorization, as required by the European Regulation 2016/1628. These new engines make it possible to exponentially reduce the emissions of particulate matter and nitrogen oxides delivered by the generator into the environment, and ensure a reduction in the environmental impact of 200% compared to standard engines.
TECHNICAL FEATURES GENSET MG 5000 I-BE
Type of phase: Single-phase Maximum power: 5 KVA / 4 KW Continuous power: 4.5 KVA / 3.6 KW VAC voltage: 230 V Frequency (Hz): 50 Starting panel: Manual with wrap-around car Engine: Briggs & Stratton XR1450 Emissions regulations: StageV Revolutions per minute RPM: 3000 Fuel: Petrol Tank capacity: 5.3 l Voltage regulator: Condenser (AVR OPTIONAL) Consumption @ 75% load: 2.5 l / h Autonomy @ 75% load: 2.1 h Sound pressure: 73 dB (A) @ 7m Length: 770 mm Width: 480 mm Height: 625 mm Net weight: 62 Kg
Are you looking for a generator with different characteristics? HERE you can find the full range of GENSET generators or other specialized brands
Non-binding images and technical data.
* Images and technical data are not binding. Please always consult the manufacturer's technical data sheet. Manel Service assumes no responsibility for any changes made by the manufacturer or any typographical errors.
Type of phase: Single-phase Maximum power: 5 KVA / 4 KW Continuous power: 4.5 KVA / 3.6 KW VAC voltage: 230 V Frequency (Hz): 50 Starting panel: Manual with wrap-around car Engine: Briggs & Stratton XR1450 Emissions regulations: Stage V Revolutions per minute RPM: 3000 Fuel: Petrol Tank capacity: 5.3 l Voltage regulator: Condenser (AVR OPTIONAL) Consumption @ 75% load: 2.5 l / h Autonomy @ 75% load: 2.1 h Sound pressure: 73 dB (A) @ 7m Length: 770 mm Width: 480 mm Height: 625 mm Net weight: 62 Kg