0
Maximum single-phase output: 2.4 KW
Continuous use single-phase output: 2 KW
Maximum three-phase power: 5.5 KW
Continuous use three-phase power: 4. 16 KW
Fuel: Gasoline
Voltage: 230 V / 400 V
Frequency: 50 Hz
Motor: Honda GX390 Recoil
Start: Tear-off
Welding Current: 40-220 A
Min/max Welding Voltage: 21. 6 V / 28.8 V
Electrode diameter: 5 mm
Consumption: 2.2 at 75% load
Length: 875 mm
Width: 620 mm
Height: 600 mm
Weight: 80 Kg
PRAMAC W220 TDC is a motorwelder, light and compact, equipped with a Honda GX390 Recoil gasoline engine capable of delivering a power of 5.5KW.
PRAMAC power welders are your reliable choice, when you are looking for a machine for small repairs, or for more demanding craft applications.
With a 220 A output you can use rutile, basic or cellulosic electrodes up to 5 mm in diameter.
Mechanical adjustment of the welding current.
Reliability, sturdiness and silence to meet all requirements.
TECHNICAL FEATURES PRAMAC W220 TDC
Maximum single-phase output: 2.4 KW
Continuous use single-phase output: 2 KW
Maximum three-phase power: 5.5 KW
Continuous use three-phase power: 4. 16 KW
Fuel: Gasoline
Voltage: 230 V / 400 V
Frequency: 50 Hz
Motor: Honda GX390 Recoil
Start: Tear-off
Welding Current: 40-220 A
Min/max Welding Voltage: 21. 6 V / 28.8 V
Electrode diameter: 5 mm
Consumption: 2.2 at 75% load
Length: 875 mm
Width: 620 mm
Height: 600 mm
Weight: 80 Kg
For more information about this and similar products do not hesitate to contact us.
Images and technical data not binding.
Maximum single-phase output: 2.4 KW
Continuous use single-phase output: 2 KW
Maximum three-phase power: 5.5 KW
Continuous use three-phase power: 4. 16 KW
Fuel: Gasoline
Voltage: 230 V / 400 V
Frequency: 50 Hz
Motor: Honda GX390 Recoil
Start: Tear-off
Welding Current: 40-220 A
Min/max Welding Voltage: 21. 6 V / 28.8 V
Electrode diameter: 5 mm
Consumption: 2.2 at 75% load
Length: 875 mm
Width: 620 mm
Height: 600 mm
Weight: 80 Kg
SHARE