WORLDWIDE SHIPPING

NEED ASSISTANCE? +39 011 25 35 33

Filtra prodotti

Converter
KW = KVA

Insert one of values to convert

List of products by manufacturer GENSET

GenSet SpA is one of the largest manufacturers of engine driven welders and generating sets. Founded in 1974, it gradually enlarged its range of products and extended its business throughout the world. The production facilities are located in Villanova d'Ardenghi, near Pavia, and covers an area of more than 35,000 square meters.

The high quality of the products has its origins in industrial processes arising from research and development. The progress made in this sphere has led the company to register numerous international patents, demonstrating the level of innovation achieved. GenSet also constructs all the components needed for the manufacturing of its machines, thereby implementing the entire production cycle in ­house. This allows direct control of the quality to be carried out and provides increased production flexibility. In this way the customer can rely on not only a wide range of products, but also on endless personalization to meet any particular requirement.


In the factory at Villanova d'Ardenghi the company also designs and makes the asynchronous alternators that are installed both on the engine driven welders and on the generating sets.


The coating division is one of the most advanced and permits the application of coatings with special systems aimed at providing a lasting finish. The bodywork and the chassis are made with automated machines, which automatically carry out any kind of process with great accuracy.


The company has ISO 9001 / UNI EN ISO 9001:2008 Quality System Certification and implements its standards in all its activities, from design to production, from purchases to sales. Each model is tested until it is fully ready to run when it is delivered.


The company’s international success is also due to the technical assistance that is readily available in every corner of the world. GenSet, through its sales network, is present in 1,200 sales outlets in Italy and in over 60 countries worldwide.


There are several production lines:


DC engine driven welders from 165A to 1000A
AC generating sets from 1kVA to 2000 kVA
Generating sets specially designed for Rental
Vehicular generators
P.T.O. Driven Generators
Lighting Towers

More
per page
Showing 1 - 12 of 386 items
  • GENSET WELDING CABLES ST 35

    Product typeWelding cables

    Welding cables ST 35 (5+3 meters).

     
  • GENSET WELDING CABLES ST 25

    Product typeWelding cables

    Welding cables ST 25 (5+3 meters).

     
  • GENSET MPM 6/230 KI - ENGINE DRIVEN WELDER 6 KVA INVERTER

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)6
    Maximum power single phase (KVA)6
    FuelDiesel
    Frequency (Hz)50
    Voltage (V)230 / 400
    Sockets configuration2 x 230V 16A CEE
    EngineKUBOTA Z482
    Emissions RegulationsStage 5
    Starting systemElectric
    Engine capacity (cm³)479
    Number cylinders2
    CoolingWater
    AlternatorSynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)20 - 240
    Open circuit voltage (V)90
    Maximum diameter electrodes (mm)6
    Intermittence240 A al 35% / 180 A al 60%
    Fuel tank capacity (L)24
    Consumption (L/h)1.7
    Running time (h)14.12
    Acoustic power93 dB(A)
    Acoustic pressure68 dB(A) at 7 m
    Length (mm)950
    Width (mm)650
    Height (mm)660
    Dry weight (Kg)214
    SilencedYes
    Super silencedYes
    Product typeEngine driven welder
    Voltage regulatorInverter
    Engine manufacturerKubota

    Maximum power Single-phase: 6 KVAMaximum power Single-phase: 6 KWFuel: DieselVoltage: 230/400 VFrequency: 50 HzEngine: Kubota Z482 (STAGE V)Starting: ElectricConsumption: 1.7 Lt/hLength: 950 mmWidth: 650 mmHeight: 660 mmWeight: 214 KgSuper silencedInverter

     
  • GENSET MPM 15/400 I-K - ENGINE DRIVEN WELDER 15 KVA
    Quick view
    List price 8 099,58 € tax incl.
    GENSET MPM 15/400 I-K - ENGINE DRIVEN WELDER 15 KVA

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)8
    Maximum power single phase (KVA)10
    Maximum power three phase (KW)12
    Continuous power three phase (KW)10.8
    Maximum power three phase (KVA)15
    Continuous power three phase (KVA)13.5
    FuelDiesel
    Frequency (Hz)50
    Voltage (V)230 / 400
    Sockets configuration1 x 400V 32A CEE - 2 x 230V 32A CEE
    EngineKubota D1105
    Emissions RegulationsStationary Use
    Engine rpm (rpm)3000
    Starting systemElectric
    Engine capacity (cm³)1123
    Number cylinders3
    CoolingWater
    AlternatorAsynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)30 - 400
    Open circuit voltage (V)70
    Maximum diameter electrodes (mm)6
    Intermittence370 A al 35% / 450 A al 40% / 350 A al 60%
    Fuel tank capacity (L)38
    Consumption (L/h)4.9
    Running time (h)7.76
    Acoustic power98 dB(A)
    Acoustic pressure73 dB(A) at 7 m
    Length (mm)1590
    Width (mm)730
    Height (mm)920
    Dry weight (Kg)450
    SilencedYes
    Super silencedYes
    Product typeEngine driven welder
    Voltage regulatorNo
    Engine manufacturerKubota

    Maximum power Three-phase: 15 KVAMaximum power Three-phase: 12 KWPower continuous use Three-phase: 13.5 KVAPower continuous use Three-phase: 10.8 KWMaximum power Single-phase: 10 KVAMaximum power Single-phase: 8 KWFuel: DieselVoltage: 230/400 VFrequency: 50 HzEngine: Kubota D1105-EStarting: ElectricConsumption: 4.9 Lt/hLength: 1590 mmWidth: 730 mmHeight:...

    Special price 6 639,00 € tax excl.
  • GENSET MPM 5/180 I-D/AE-Y - ENGINE DRIVEN WELDER 5 KVA
    Quick view
    List price 3 212,26 € tax incl.
    GENSET MPM 5/180 I-D/AE-Y - ENGINE DRIVEN WELDER 5 KVA

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)3.2
    Maximum power single phase (KVA)4
    Maximum power three phase (KW)4
    Continuous power three phase (KW)3.6
    Maximum power three phase (KVA)5
    Continuous power three phase (KVA)4.5
    FuelDiesel
    Voltage (V)230 / 400
    Sockets configuration1 x 400V 16A CEE - 1 x 230V 16A CEE
    EngineYanmar L100V, 4 stroke
    Emissions RegulationsStage 5
    Engine rpm (rpm)3000
    Starting systemElectric
    Engine capacity (cm³)435
    Number cylinders1
    CoolingAir
    AlternatorAsynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)40 - 170
    Open circuit voltage (V)90
    Maximum diameter electrodes (mm)4
    Intermittence170 A al 35% / 180 A al 40% / 140 A al 60%
    Consumption (L/h)1.5
    Acoustic power99 dB(A)
    Acoustic pressure74 dB(A) at 7 m
    Length (mm)950
    Width (mm)480
    Height (mm)574
    Dry weight (Kg)148
    SilencedNo
    Super silencedNo
    Product typeEngine driven welder
    Voltage regulatorNo
    Engine manufacturerYanmar

    Maximum power Three-phase: 5 KVAMaximum power Three-phase: 4 KWPower continuous use Three-phase: 4.5 KVAPower continuous use Three-phase: 3.6 KWMaximum power Single-phase: 4 KVAMaximum power Single-phase: 3.2 KWFuel: DieselVoltage: 230/400 VFrequency: 50 HzEngine: Yanmar L100V (STAGE V)Starting: ElectricConsumption: 1.5 Lt/hLength: 950 mmWidth: 480...

    Special price 2 633,00 € tax excl.
  • GENSET MPM 6/230 S-L - ENGINE DRIVEN WELDER 6 KVA

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)4
    Maximum power single phase (KVA)5
    Maximum power three phase (KW)4.8
    Continuous power three phase (KW)4.32
    Maximum power three phase (KVA)6
    Continuous power three phase (KVA)5.4
    FuelDiesel
    Voltage (V)230 / 400
    Sockets configuration1 x 400V 16A CEE - 1 x 230V 16A CEE
    EngineLombardini 15LD440
    Emissions RegulationsStage 5
    Engine rpm (rpm)3000
    Starting systemElectric
    Engine capacity (cm³)442
    Number cylinders1
    CoolingAir
    AlternatorAsynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)20 - 210
    Open circuit voltage (V)65
    Maximum diameter electrodes (mm)6
    Intermittence210 A al 60% / 180 A al 100%
    Fuel tank capacity (L)10.5
    Consumption (L/h)1.5
    Running time (h)7
    Acoustic power96 dB(A)
    Acoustic pressure71 dB(A) at 7 m
    Length (mm)907
    Width (mm)630
    Height (mm)775
    Dry weight (Kg)185
    SilencedYes
    Super silencedYes
    Product typeEngine driven welder
    Voltage regulatorNo
    Engine manufacturerLombardini

    Maximum power Three-phase: 6 KVAMaximum power Three-phase: 4.8 KWPower continuous use Three-phase: 5.4 KVAPower continuous use Three-phase: 4.32 KWMaximum power Single-phase: 5 KVAMaximum power Single-phase: 4 KWFuel: DieselVoltage: 230/400 VFrequency: 50 HzEngine: Lombardini 15LD440 (STAGE V)Starting: ManualConsumption: 1.5 Lt/hLength: 907 mmWidth: 630...

     
  • GENSET MPM 5/225 I-EB/H - ENGINE DRIVEN WELDER 5 KVA

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)3.2
    Maximum power single phase (KVA)4
    Maximum power three phase (KW)4
    Continuous power three phase (KW)3.6
    Maximum power three phase (KVA)5
    Continuous power three phase (KVA)4.5
    FuelGasoline
    Frequency (Hz)50
    Voltage (V)230 / 400
    Sockets configuration1 x 400V 16A CEE - 1x 230V 16A CEE
    EngineHonda GX390
    Emissions RegulationsStage 5
    Engine rpm (rpm)3000
    IgnitionRecoil
    Starting systemManual
    Engine capacity (cm³)390
    Number cylinders1
    CoolingAir
    AlternatorAsynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)40 - 225
    Open circuit voltage (V)90
    Maximum diameter electrodes (mm)5
    Intermittence225 A al 35% / 225 A al 40% / 170 A al 60%
    Fuel tank capacity (L)6.1
    Consumption (L/h)3.3
    Running time (h)1.85
    Acoustic power98 dB(A)
    Acoustic pressure73 dB(A) at 7 m
    Length (mm)720
    Width (mm)480
    Height (mm)515
    Dry weight (Kg)95
    SilencedNo
    Super silencedNo
    Product typeEngine driven welder
    Voltage regulatorNo
    Engine manufacturerHonda

    Maximum power Three-phase: 5 KVAMaximum power Three-phase: 4 KWPower continuous use Three-phase: 4.5 KVAPower continuous use Three-phase: 3.6 KWMaximum power Single-phase: 4 KVAMaximum power Single-phase: 3.2 KWFuel: GasolineVoltage: 230/400 VFrequency: 50 HzEngine: Honda GX 390 (STAGE V)Starting: ManualConsumption: 3.3 Lt/hLength: 720 mmWidth: 480...

     
  • GENSET MPM 5/200 I-EL/H - ENGINE DRIVEN WELDER 4.5 KVA

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)2.88
    Maximum power single phase (KVA)3.6
    Maximum power three phase (KW)4
    Continuous power three phase (KW)3.2
    Maximum power three phase (KVA)4.5
    Continuous power three phase (KVA)3.6
    FuelGasoline
    Voltage (V)230 / 400
    Sockets configuration1 x 400V 16A CEE - 1 x 230V 16A CEE
    EngineHonda GX390
    Emissions RegulationsStage 5
    Engine rpm (rpm)3000
    IgnitionRecoil
    Starting systemManual
    Engine capacity (cm³)390
    Number cylinders1
    CoolingAir
    AlternatorAsynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)30 - 200
    Open circuit voltage (V)70
    Maximum diameter electrodes (mm)4
    Intermittence200 A al 35% / 150 A al 60%
    Fuel tank capacity (L)6.1
    Consumption (L/h)3.3
    Running time (h)1.85
    Acoustic power96 dB(A)
    Acoustic pressure71 dB(A) at 7 m
    Length (mm)720
    Width (mm)480
    Height (mm)515
    Dry weight (Kg)96
    SilencedNo
    Super silencedNo
    Product typeEngine driven welder
    Voltage regulatorNo
    Engine manufacturerHonda

    Maximum power Three-phase: 4.5 KVAMaximum power Three-phase: 3.6 KWPower continuous use Three-phase: 4 KVAPower continuous use Three-phase: 3.2 KWMaximum power Single-phase: 3.6 KVAMaximum power Single-phase: 2.88 KWFuel: GasolineVoltage: 230/400 VFrequency: 50 HzEngine: Honda GX 390 (STAGE V)Starting: ManualConsumption: 3.3 Lt/hLength: 720 mmWidth: 480...

     
  • GENSET MPM 5/170 I-CX/H - ENGINE DRIVEN WELDER 4.5 KVA

    PhaseSingle phase / Three phase
    Maximum power single phase (KW)2.4
    Maximum power single phase (KVA)3
    Maximum power three phase (KW)3.6
    Continuous power three phase (KW)3.2
    Maximum power three phase (KVA)4.5
    Continuous power three phase (KVA)4
    FuelGasoline
    Frequency (Hz)50
    Voltage (V)230 / 400
    Sockets configuration1 x 400V 16A CEE - 1 x 230V 16A CEE
    EngineHonda GX270
    Engine rpm (rpm)3000
    IgnitionRecoil
    Starting systemManual
    Engine capacity (cm³)270
    Number cylinders1
    CoolingAir
    AlternatorAsynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)40 - 170
    Open circuit voltage (V)90
    Maximum diameter electrodes (mm)4
    Intermittence170 A al 35% / 140 A al 60%
    Fuel tank capacity (L)5.3
    Consumption (L/h)2.2
    Running time (h)2.41
    Acoustic power95 dB(A)
    Acoustic pressure70 dB(A) at 7 m
    Length (mm)720
    Width (mm)480
    Height (mm)515
    Dry weight (Kg)94
    SilencedNo
    Super silencedNo
    Product typeEngine driven welder
    Voltage regulatorNo
    Engine manufacturerHonda

    Maximum power Three-phase: 4.5 KVAMaximum power Three-phase: 3.6 KWPower continuous use Three-phase: 4 KVAPower continuous use Three-phase: 3.2 KWMaximum power Single-phase: 3 KVAMaximum power Single-phase: 2.4 KWFuel: GasolineVoltage: 230/400 VFrequency: 50 HzEngine: Honda GX 270 (STAGE V)Starting: ManualConsumption: 2.2 Lt/hLength: 720 mmWidth: 480...

     
  • GENSET WELDBABY 180i - ENGINE DRIVEN WELDER 1 KVA INVERTER

    PhaseSingle phase
    Maximum power single phase (KW)1
    Maximum power single phase (KVA)1
    FuelGasoline
    Frequency (Hz)50
    Voltage (V)110 / 230
    Sockets configuration1 x 230V 16A CEE - 1 x 110V 16A CEE
    EngineHonda GX200, 4 stroke, OHV
    Emissions RegulationsStage 5
    Engine rpm (rpm)4000
    IgnitionRecoil
    Starting systemPull starter
    Engine capacity (cm³)196
    Number cylinders1
    CoolingAir
    AlternatorSynchronous
    Protection degreeIP23
    Motor insulation classH
    Regulation current (A)40 - 165
    Open circuit voltage (V)70
    Maximum diameter electrodes (mm)4
    Intermittence165 A al 60%
    Fuel tank capacity (L)3.8
    Consumption (L/h)1.8
    Running time (h)2.11
    Acoustic power98 dB(A)
    Acoustic pressure73 dB(A) at 7 m
    Length (mm)510
    Width (mm)440
    Height (mm)460
    Dry weight (Kg)35
    SilencedNo
    Super silencedNo
    Product typeEngine driven welder
    Voltage regulatorInverter
    Engine manufacturerHonda

    Maximum power Single-phase: 1 KVAMaximum power Single-phase: 1 KWFuel: GasolineVoltage: 110/230 VFrequency: 50 HzEngine: Honda GX 200 OHV (STAGE V)Starting: ManualConsumption: 1.8 Lt/hLength: 510 mmWidth: 440 mmHeight: 460 mmWeight: 35 KgInverter

     
  • GENSET MG 5010 DM - VEHICULAR GENERATOR 6.25 KVA
    Quick view
    List price 6 284,22 € tax incl.
    GENSET MG 5010 DM - VEHICULAR GENERATOR 6.25 KVA

    PhaseSingle phase
    Maximum power single phase (KW)5
    Maximum power single phase (KVA)6.25
    FuelDiesel
    Frequency (Hz)50
    Voltage (V)230
    EngineYanmar L100V, 4 stroke
    Emissions RegulationsStage 5
    Engine rpm (rpm)3000
    Starting systemElectric
    Engine capacity (cm³)435
    Number cylinders1
    CoolingAir
    AlternatorSynchronous
    Protection degreeIP23
    Motor insulation classH
    Consumption (L/h)1.5
    Acoustic power89 dB(A)
    Acoustic pressure64 dB(A) at 7 m
    Length (mm)700
    Width (mm)535
    Height (mm)530
    Dry weight (Kg)145
    SilencedYes
    Super silencedYes
    Product typeGenerator
    ATS Switch deviceNo
    Voltage regulatorNo
    Engine manufacturerYanmar

    Maximum power Single-phase: 6.25 KVAMaximum power Single-phase: 5 KWFuel: DieselVoltage: 230 VFrequency: 50 HzEngine: Yanmar L100V (STAGE V)Starting: ElectricConsumption: 1.5 Lt/hLength: 700 mmWidth: 535 mmHeight: 530 mmWeight: 145 Kg

    Special price 5 151,00 € tax excl.
  • GENSET MG 6020 DM - VEHICULAR GENERATOR 7.5 KVA

    PhaseSingle phase
    Maximum power single phase (KW)6
    Maximum power single phase (KVA)7.5
    FuelDiesel
    Frequency (Hz)50
    Voltage (V)230
    EngineKUBOTA Z482
    Emissions RegulationsStage 5
    Engine rpm (rpm)3000
    Starting systemElectric
    Engine capacity (cm³)479
    Number cylinders2
    CoolingWater
    AlternatorSynchronous
    Protection degreeIP23
    Motor insulation classH
    Consumption (L/h)2.6
    Acoustic power87 dB(A)
    Acoustic pressure62 dB(A) at 7 m
    Length (mm)941
    Width (mm)550
    Height (mm)600
    Dry weight (Kg)190
    SilencedYes
    Super silencedYes
    Product typeGenerator
    ATS Switch deviceNo
    Voltage regulatorNo
    Engine manufacturerKubota

    Maximum power Single-phase: 7.5 KVAMaximum power Single-phase: 6 KWFuel: DieselVoltage: 230 VFrequency: 50 HzEngine: Kubota Z482 (STAGE V)Starting: ElectricConsumption: 2.6 Lt/hLength: 941 mmWidth: 550 mmHeight: 600 mmWeight: 120 Kg

     
Showing 1 - 12 of 386 items