WORLDWIDE SHIPPING

NEED ASSISTANCE? +39 011 25 35 33

ZIPWAKE CP-S CONTROL PANEL

ZIPWAKE CP-S CONTROL PANEL
ZIPWAKE

2011238

New product

Display: 2.4’’ Transflective color TFT, 320 x 240 pixels, double-sided, anti-reflection coated window
Internal sensors: 5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light
Supply voltage: 12 - 32 V DC
Power consumption: 10 W max
Operating temperature: -20° to +85°C (-4° to +185°F)
Storage temperature: -40° to +90°C (-40° to +194°F)
Waterproof rating: IP67 / IP64 (front / back)
Compass safe distance: 0.5 m (1.7 ft)
Compliance: CE, FCC
Weight: 0.22 kg (0.49 lbs)
Mounting: Surface, flush or gimbal bracket mount

More details

List price

855,00 € tax excl.

1 043,10 € tax incl.

Estimated costs

bx_loader
Free

Add to compareRemove from compare

Add to wishlist

payment logo

BUSINESS AREA

Request offer
Voltage (V)12 - 32
Protection degreeIP67 / IP64 (front / back)
Input power (W)10
Power cable length (m)7
Operating temperature (°C)-20° to +85°C
MaterialBrushed Aluminium
Length (mm)60
Width (mm)100
Height (mm)110
Product typeCabin control
Display/read-outTFT 2.4''
Weight (Kg)0.23

ZIPWAKE CP-S CONTROL PANEL

Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the driver to focus on the right thing – enjoying the boat ride!
The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button.
In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller
automatically ensure dynamic elimination of uncomfortable and dangerous boat pitch and roll.
The system provides continuous feedback of boat speed, pitch and roll angle, as well as the
interceptors´ positions, on a 2.4” sunlight-readable color display.
The panel’s waterproof design withstands harsh marine conditions in open boats or on a flybridge.
The sockets for connecting peripherals are located on the rear side of the panel. In addition to connectors for the system’s distribution unit and multiple control panels, external GPS and
NMEA2000 equipment can be connected. The system can also be connected to the ignition key for automatic system power-on. A waterproof cap conceals the USB interface that allows for future software upgrades and ensures that the Zipwake Dynamic Trim Control System is future-proof.

FEATURES
zipwake cp s features
• Fully automatic
- Dynamic pitch and roll control
- Steering and turn enhancement
• Built-in GPS and motion sensors
• Unique and intuitive 3D controls
• Sunlight readable color display
• Instant state user feedback
• Auto power on/off via ignition key sense
• Full range of electrical interfaces
• Waterproof
• Auto dimming / night mode
• Upgradable via USB stick
• Up to four control panels in the system
• Surface, flush or gimbal bracket mount
• Manages installation configurations from 1 up to 6 interceptors
• Auto Cleaning
- Periodically selectable cleaning cycle
- Prevents fouling inside the interceptor
• Monitored and/or controlled from external devices, e.g. multifunction displays or plotters via its NMEA 2000 interface

INTERFACES

• I-BUS IN (CAN bus)
• I-BUS OUT (CAN bus)
• NMEA 2000
• Key sense
• USB Device Port (Type A)
• USB Host Port (Type B)
• External GPS (NMEA 0183 / RS232 auto baud-rate sensing) 

Not binding images and data.

* The data shown are supplied by the manufacturer, ManelService assumes no responsibility for any incorrect values. Take a look at the attached manufacturer's data sheet.

spedizioni eng
pagamenti sicuri eng
esperienza eng
certificazioni eng

RELATED PRODUCTS

servizio express