By submitting this form, I agree to the data entered being used to reply to my request for information products and services.
|Engine rpm (rpm)||1500|
|Three-phase power (KW)||30|
|Three-phase power (KVA)||37.5|
|Dry weight (Kg)||230|
|Type of alternator||Constant Speed|
Alternator full range covers ratings from 5kVA to 1386kVA, so meeting the most part of needs for industrial, marine, commercial, construction, mining and telecommunications, both for prime or standby power generation.
Ac generators are self-excited, self-regulated, and supplied with regulator and inbuilt booster.
COMPLIANCE WITH STANDARDS
The generators are designed in compliance with IEC60034-1/60034-2, BS4990 & 5000, VDE0530, NEMA MG1-2006, CSA C/UL.
Certificate ISO 2000,CE conform to the requirements of IEC60034, certificate no. No. 01157 by NQA Certification Co., Ltd.
The generators are available in either single-bearing or double-bearing.
Single-bearing construction has international general SAE flange adaptors and SAE disc couplings.
It ensures the alignment during the assembly operation of generator to the engine.
Double-bearing construction has IMB34 standard forms. It has all SAE adaptors for option.
Special constructions on request. Double bearing alternators are balanced with1/2 key.
All alternators can operate in both directions: clockwise and counterclockwise.
OVERLOADS&SHORT CIRCUIT CURRENT
Followings overloads are allowed:
10% for 1 hour
14% for 15 minutes
25% for 5 minutes
50% for 2 minutes
With the addition of an optional Permanent Magnet, alternators can sustain 300% short circuit current for 10 seconds.
The alternators permit an unbalanced load of 25% rated current. The deviation of line voltage is less than 5%.
The insulation system is class ‘H’
Vacuum pressure Impregnation
Windings and Electrical Performance
Generator stator is wound to 2/3 pitch. This eliminates triplen (3rd, 9th,15th…) harmonics on the voltage waveform and is found to be the optimum design for trouble-free supply of non-linear loads.
TIF(as defined by BS4999 Part 40) is better than 2%. TIF(as defined by ASAC50.12) is better than 50.
The alternators are supplied with interference suppression grade N to VDE 0875.
This arrangement provides the alternator with excellent damping against torsional vibrations that occurs during
changes in load and when running in parallel.
ACCESSORIES & OPTION
Droop kit for sharing of reactive current during parallel operation
- Remote voltage potentiometer
- PT100 thermal protection embedded in stator windings
- Anti condensation heaters
- IP23 protection
- Special treatment for damp-saline or corrosive environment
- Permanent Magnet
- Control panel with LCD digital meter
All ratings are base in 40C° ambient temperature at 1000m altitude.
Site altitude exceeds 1000m above the sea level, (ambient temperature 40C°)
1000 mt. A.s.l.= 100%; 1500 mt. A.s.l.= 97%; 2000 mt. A.s.l.= 94%; 2500 mt. A.s.l.= 91%;
3000 mt. A.s.l.= 87%; 3500 mt. A.s.l.= 82%
Power factor cos. Phi<0.8
Cos. Phi 0.81= 100%; Cos. Phi 0.7= 96%; Cos. Phi 0.6= 92%; Cos. Phi 0.5= 91%; Cos. Phi 0.4= 90%
Not binding images and technical data.
* The data shown are supplied by the manufacturer, ManelService assumes no responsibility for any incorrect values. Take a look at the attached manufacturer's data sheet.
1 033,00 €
1 092,00 €