0
Supply voltage: 7...32 .
Power consumption: typically less than 2W (auto, standby and AMF modes active, LCD power saving active).
Rated power source frequency 50Hz or 60Hz.
Backlit transflective LCD display.
Operating temperatures: -25°C to 60°C.
Degree of protection: IP65 (only with gasket properly installed).
installed).
Mounting area: 218 x 159 (W x H).
Graphic display dimensions: 70 x 38 mm - 128 x 64 pixels.
EMC: compliant with EN61326-1 standards.
Safety: built in accordance with EN61010-1.
Width: 244 mm
Length: 40 mm
Height: 178 mm
Weight: 0.650 Kg
SICES ATS115 PLUS is a board for automatic control of the switching of consumers between different power sources. It provides three-phase voltage (RMS) measurements for both sources and three-phase current (RMS) measurements for the consumer.
Suitable for operation with multiple sources. SICES ATS115 Plus can handle different types of power sources. A or B sources can be selected as "mains" or "generator set" in any combination. All parameters can be set directly from the keypad or by using the free software (BoardPrg3), available on the SICES website.
SICES ATS115 Plus, in both versions, has a graphic display that allows real-time control of the switch status, measurements and any alarms. SICES ATS115 Plus allow the remote control of the switch through the communication ports. The plus version integrates numerous communication interfaces
Significant features of the SICES ATS115 Plus
Output supply voltage: 7...32 .
Output consumption: typically less than 2W (auto mode, standby and AMF active, LCD power saving active).
Rated power frequency 50Hz or 60Hz.
Backlit transflective LCD display .
Operating temperatures: -25 °C to 60 °C.
Protection class: IP65 (only with gasket correctly
installed).
Mounting area: 218 x 159 (W x H).
Graphic display dimensions: 70 x 38 mm - 128 x 64 pixels.
EMC: compliant with EN61326-1.
Safety: built in accordance with EN61010-1.
Width: 244 mm
Length: 40 mm
Height: 178 mm
Weight: 0.650 Kg
MINCIPAL FEATURES
True RMS measurement of power voltages and user currents
Measurement of active, reactive and apparent power and factor
8 programmable digital inputs (isolated)
8 programmable digital outputs
USB port . <RS232, RS485 and ethernet port (for ATS115Plus).
Chart display with single line diagram representation.
Internal clock.
Event and data logging.
Remote commands for switching and start/stop.
Built-in horn.
If you need more information please do not hesitate to contact us.
Non-committal images and technical data.
Supply voltage: 7...32 .
Power consumption: typically less than 2W (auto, standby and AMF modes active, LCD power saving active).
Rated power source frequency 50Hz or 60Hz.
Backlit transflective LCD display.
Operating temperatures: -25°C to 60°C.
Degree of protection: IP65 (only with gasket properly installed).
installed).
Mounting area: 218 x 159 (W x H).
Graphic display dimensions: 70 x 38 mm - 128 x 64 pixels.
EMC: compliant with EN61326-1 standards.
Safety: built in accordance with EN61010-1.
Width: 244 mm
Length: 40 mm
Height: 178 mm
Weight: 0.650 Kg
